Tefal Ultraglide Steam Iron FV4042

Ultraglide Steam Iron FV4042 Extra easy Premium Durilium makes ironing easy
  • 2400W and powerful 150g/min shot of steam to eliminate stubborn creases with ease
  • Glide effortlessly over fabrics thanks to the Premium Durilium Thechnology soleplate invented by Tefal
Essentials
  • FV4042-B1.png

    Time saving

    Fast ironing with the combination of a smooth gliding soleplate and powerful shot of steam.

  • FV4042-B2.png

    Active Steam Holes

    More active steam holes for even coverage across your garments.

  • FV4042-B3.png

    Easy Glide

    The Durilium soleplate makes for effortless gliding.

Frequent questions

No, leave the iron to cool down before putting it away and follow the 4 tips: empty out the water remaining in the tank, set the thermostat to the minimum, close the steam control and stand it upright or place it on the base (depending model).


If your iron has an anti-calc system, you should clean the anti-calc valve once a month. To do this, unplug the iron and leave it to cool for 30-45 minutes. Empty the water and remove the valve, holding it by the top. Let the anti-calc valve soak for 4 hours in a glass of commercially available white vinegar or natural lemon juice, then thoroughly rinse the anti-calc valve under tap water. Reposition the anti-calc valve into your iron. Warning! Never touch the end of the anti-calc valve. the iron does not work without the anti-calc valve.


Gently shake your iron to reactivate it, the lights should start to flash and then the product should start to heat up.

The electronic system cuts the power and the auto-stop light flashes if the iron is not moved for more than 8 minutes (on its heel rest or base) or is left flat for more than 30 seconds. To turn the iron back on, gently shake it until the light goes out.
Please go to the “Accessories” section of the website to easily find whatever you need for your product.
Find more detailed information in the Guarantee section of this website.